Function Menu Operation
Function Menu Operation
DTV Setting menu
DTV related functions can be reached in this menu.
Antenna level
Press VOL+ button to enter DTV Antenna level menu.
Antenna level menu
ANTENNA
SIGNAL STRENGTH | Adjust the antenna until |
CHANNEL STRENGTH | the level is 60 or hige |
Signal strength
Current 50 Max 50
This menu assists you to adjust the position and direction of the antenna so that best signal can be received. Adjust the antenna until the received signal strength level is 60 or higher.
Audio Setting
Press VOL+ button to enter DTV Andio Setting menu.
Audio Setting menu
AUDIO SERVICE
English Stereo Main complete
Digital audio parameters can be set in this menu.
Audio Service
Press VOL+ button to enter Audio Service menu in which you can select preferred audio service. Totally six digital audio services are possibly available to be selected. While actually selectable audio services depend on what kind of audio service is contained in current program.
Audio preference
Press VOL+ button to enter Audio Preference menu in which you can select preferred audio language. Three kinds of audio language are selectable including English, Spanish and French. While one kind of language can not be chosen as primary language and secondary language at the same time.
CC Setting
Press VOL+ button to enter DTV CC Setting menu.
Factory Reset
Press VOL+ button to reset DTV settings with
default value.
Note:
It is strongly recommended that you should scan DTV programs right after reset DTV settings. Otherwise you can not watch all DTV programs.
Aspect
Only DTV display aspect ratio can be selected between model and mode2 using this item. Please choose preferred one.
Auto Scan
Press VOL+ button to start DTV auto scan. It takes a few minutes. During the auto scan process please do not terminate it by turning off the TV set. Otherwise the program information may not be stored.
Tune menu
You can modify settings on TV input in this menu. All settings in this menu are effective for ATV only. Press CH+/CH- buttons to select available items
in this menu and perform corresponding operation.
Note:
You can enter this menu only in TV mode.
Color System
Three color systems including NTSC, PAL_M and PAL_N are supported by this TV set. You can select AUTO to allow the TV set to detect and set color system automatically or force the TV set to display the chosen color system by pressing VOL+ /VOL- buttons when this item is highlighted. Once AUTO is selected, system will detect the color system and force to display according to the detection result and this item will show which color system is forced by system while it takes a little time to finish the automatic detection. Due to the complicated situation it is not guaranteed that color system can be detected correctly by the
TV set. Please select proper color system if necessary.
14
