5 | CHAPTER 1 – ABOUT YOUR SMART BOARD 600I3 OR SBD600I3 INTE RACTIVE
WHITEBOARD SYSTEM
Standard Accessories
The following accessories are included with your SMART Board 600i3 or SBD600i3
interactive whiteboard system.

Remote Control

The remote control enables you to control the system and
set up your UF55/UF55w projector. Use the remote control
to access menu options, system information and input
selection options.

Pen Tray Tools

The pen tray tools include four pens and an eraser.
The pens have rubberized grip areas, colored to match four
colors of digital ink: black, red, green and blue. You can use
dry-erase markers instead of the included pens, as long as
they’re a similar shape, don’t scratch or mark your
interactive whiteboard’s surface and reflect infrared light.
You can use Sanford® EXPO® markers as substitutes.
NOTES
• If the substitute isn’t reflective to infrared light, the pen tray sensors might not
detect the presence of the pen.
• Some of SMART’s older pens aren’t designed to reflect infrared light and the
pen tray sensors might not detect them reliably. Wrap light-colored tape
around a substitute pen to improve the reflection of infrared light, helping
with tool detection.
• Don’t use low-odor dry-erase markers such as Sanford EXPO2, which can be
very difficult to remove. Use standard dry-erase (high-odor) markers that
show a warning to use them only in well-ventilated areas.

Eraser

The eraser resembles a rectangular chalkboard eraser.
Again, you can use a substitute object, as long as it has a
similar shape, doesn’t scratch or mark your interactive
whiteboard’s surface and reflects infrared light.