25 | CHAPTER 3 – CONNECTING YOUR SMART BOARD 600I3 OR SBD600I3
INTERACTIVE WHITEBOARD SYSTEM
4. Connect the ECP cables to the projector by connecting each section separately.
– Connect the S-Video and two Audio cables to the receptacles in section A.
– Connect the Video and two Audio cables to the receptacles in section B.
– Connect the Audio 2 and Computer 2 VGA cables to the receptacles
in section C.
– Connect the ECP DB-9 Control cable in section D.
5. Connect the VESA RGB (VGA) connector and the DB-25 connector from the
harness cable to the ECP.
VideoS-video
Audio In Audio In
VGA Out
Audio 1 Audio Out Service Control
Computer(VGA)2
Audio 2
Computer(VGA)1
BAC DBAC D
VGA Connector
DB-25
Connector