40 | CHAPTER 5 – REMOTELY MANAGING YOUR SMART BOARD 600I3 OR
SBD600I3 INTERACTIVE WHITEBOARD SYSTEM
The Powerstate control enables the projector to turn on or off and switch between
other related controls.
NOTE
You must send the Off command twice. The first command displays an on-screen
message, and the second command shuts off the system. You must send the
second command within 10 seconds of the first command or it times out.
Command Response Powered Off
on powerstate=[powerstate] yes
off [off option] powerstate=[powerstate] yes
get powerstate powerstate=[powerstate] yes
Field Possible Values Description
off option now This is an optional field, which
shuts down the projector
immediately. If Now isn’t
specified, a dialog box
appears with the message,
“Press Power Button to
Turn off Projector.”
A second Off command must
be sent within 10 seconds to
completely turn off the
projector or the projector
doesn’t turn off.
powerstate powering
on
cooling
confirm off
idle
Indicates the projector’s
current powerstate
NOTE: Confirm Off is a
non-selectable powerstate
that is returned during stage
one of the two-button off
sequence.