Smart Technologies (XP20-2000i-B) manual Rerouting the DB9 Cable to the X-Port 20 Switch

7.Unplug the DB9 cable from the serial controller and plug it into the gender changer on the bottom card of the X-Port 20 switch.

Unplug DB9 cable (From Resident Computer Serial Port)

Plug DB9 cable into gender changer on bottom card (connector not shown in image)

Serial Controller

X-Port 20 Switch

Rerouting the DB9 Cable to the X-Port 20 Switch

8.Using a Phillips No. 1 screwdriver, install the X-Port 20 switch on the studs in the electronics tray and secure it in place with the four supplied pan head screws and star washers.

Studs (x 4)

Star Washers (x 4)

Pan Head Screws (x 4)

X-Port 20 Switch

Installing the X-Port 20 Switch in the Electronics Tray

4 Installing an X-Port 20 Switch in a 2000i 99-00539-00 Rev B0