Smart Technologies (XP20-2000i-B) manual X-Port 20 Switch XP20-2000i-B Installation Guide for any

Models: (XP20-2000i-B)

1 14

Page 1

(XP20-2000i-B)

Installation Guide

for any

2000i

with an

NEC VT465 or VT560 Projector

Image 1

Contents

Equipped with an NEC VT465 or VT560 Projector X-Port 20 Switch XP20-2000i-B Installation Guide for any99-00539-00 Rev B0 Trademark Notice FCC WarningCopyright Notice Installing an X-Port 20 Serial/Video Switch in a 2000i-DVS ContentsCustomer Support 99-00539-00 Rev A0 Installing an X-Port 20 Switch in a To mount the X-Port 20 switchLamp Off Button Location of Button Head Screws Replacing the Labels99-00539-00 Rev B0 Open Electronics Tray Components of the X-Port 20 SwitchTop Card Ribbon CableInstalling the X-Port 20 Switch in the Electronics Tray Rerouting the DB9 Cable to the X-Port 20 SwitchRerouting the Ribbon Cable To connect the X-Port 20 switchRerouting the Room Control Module if applicable NOTE Connect the I²C cable Connecting the Video Cable to the X-Port 20 Switch Connecting the RBG 1 IN Cable to the X-Port 20 SwitchConnecting the Video Cable to the Projector NOTE Connection panel is depicted upside down as installedTo connect a guest laptop Connecting the Guest Laptop Cable Bundle to theb. Click the Refresh or Monitor Refresh tab a. From the Start menu, select Settings Control Panel DisplayIf the image on the screen is too large or too small Contacting SMART Technical Support Customer SupportGeneral Inquiries