smartBridges

to the future ...

The following information about all the associated clients is available in real time; the values are refreshed after every 5 seconds.

λMAC Address

λReceived Signal Strength Indication ( RSSI ) in both % and dBm

λLink Quality

λIP Address is shown only if some traffic exists between airPoint-PRO and the wireless client, otherwise it is shown as Unknown.

If you are using the airBridge ( F/W Ver 0.01.04 onwards ) as wireless client, you may see the MAC address of airBridge and the IP Address of either airBridge or any PC behind it, based on the first traffic. The airBridge replaces all the packets from ethernet to wireless with its own MAC address.

If the traffic doesn't exist between the clients and airPoint-PRO then you can create the traffic (Ping ) and make the values refresh by clicking "Refresh" button. If the IP address is not reachable then the values may not Refresh.

Revision 1.8

Page 19 of 28