SmartBridges airPoint Pro Series SB2820, Grounding:

RJ45 to Network / PC

to airPoint-PRO / airPoint-PRO Outdoor / airPoint-PRO TOTAL

AC Adapter

powerShot

Cross Coupler switch

RJ45 Cable

SB2820

Note:

Restore Default button at the bottom side of the powerShot should be used to restore the device back to factory / WISP defaults.

Restore Default button

Cross Coupler switch

Grounding:

The internal ground of the TOTAL is bought out to an earthing stud at the bottom side of the unit. Crimp the 10 AWG wire to the earth tag and secure the earth tag on to the earthing stud tightly with the M6 nut provided. Ensure that the other end of the 10 AWG wire is grounded to the earth at the power ground of the premises.

Note:

Grounding has to be done before mounting the TOTAL on wall/pole.

Revision 1.8

Page 8 of 28

Contents

airPoint-PROSeries Wireless Access Point Quick Install Guide Installing the airPoint-PROSeries Contents of Package airPoint-PROOutdoor airPoint-PROTOTAL Hardware Installation for airPoint-PROOutdoor / airPoint-PROTOTAL Important note - Earthing Requirements: Follow National Electric Code NEC 810-20and NEC 810-21for this installation Mounting the airPoint-PROOutdoor Note: airPointPRO Page Page Page SB2820 Connecting the airPoint-PROseries using Power Over Ethernet: Software Installation System Requirements: Computer with Windows 98/ME/NT/2000/XP with working network card Installing airPoint-PROSetup Software: index.htm Configuring the airPoint-PRO For Windows 98 / ME / NT / 2000 / XP b)Configuring airPoint-PROusing a standalone PC Using simpleMonitor 1.LOGIN TAB Start Programs SETTING THE OPERATIONAL MODE OF Access Point Client Bridge Wireless Bridge Wireless Bridge Tab Wireless Repeater Client Info Client Auth Link Status Tabs Page 4.SECURITY TAB 5.ADVANCED TAB Regulatory Domain Settings Configuration Port Transmission and Reception Antenna airPoint-PROOutdoor: Configuring the airPoint-PROin Access Point Mode Client Auth Tabs 1.Getting associated Client's Information 2.Authorizing the Clients Getting associated Client's Information Page Page External Radius Server Authorization Set Parameters λSource Port (Default Port is 1812) λDestination Port (supported in F/W 1.4.j.7 onwards) λRadius Server IP Address Configuring the airPoint-PROin Client Bridge Mode Site Survey Link Status Tabs Associating with the Access Point - SiteSurvey Tab λTwo different Methods are possible for association Configuring the airPoint-PROin Wireless Bridge Mode 1.Point to Point 2.Point to MultiPoint Note :- Upto 680 LANs can be authorized simultaneously in the file Configuring the airPoint-PROin Repeater Mode Site Survey Associating with the Access Point - SiteSurvey Tab Repeater in Access Point Role Repeater in Wireless Client Role 5.Dial a Power Changing the output Power of airPoint-PRO Dial a Power Tab Restore Factory Default Settings Appendix A Appendix B Operating Temperature Range Products and model numbers