smartBridges
to the future ...
Note: Client to Client communication TAB is disabled in the repeater mode
If the client gets disassociated from the airPoint-PRO due to any reason ( power down etc ) you will continue to see the entry in the list for upto 5 minutes, before it is removed from the list.
You can Enable/Disable the communication between the individual clients by clicking the Disable Client to Client Communication check box.
Note: - 128 Clients can associate simultaneously with airPoint-PRO.
Authorizing the Clients for airPoint-PRO
You can pre-authorize the clients associating with airPoint-PRO by selecting the Client Auth Tab of simpleMonitor. airPoint-PRO supports two different authorization schemes as below. Please select between the schemes or you may disable the authorization algorithm.
λInternal MAC based Authorization
λExternal Radius Server Authorization
Internal MAC based Authorization
Note: - 680 Clients can be authorized with airPoint-PRO. The authorized client table can be retrieved from the Access Point by using Read Table option. If the entries are found then it will be displayed on the screen or one need to key in the entries. Entries can be entered one by one manually or by using the entries in the file.
Revision 1.8 | Page 20 of 28 |