Using the base as a template, drill 3 holes of 1/8" diameter on the top seat. Mount the unit onto the top seat as shown (right).

Battery Installation

The pool side alarm is designed to be powered by a standard 9V alkaline battery.

After installing battery, press the TEST button located at the

front on the control unit. The alarm will sound either one beep, or 5 consecutive beeps.This will depend whether the unit is turned ON or OFF.

Low Battery Indicator

The unit has a built-in microprocessor which automatically monitors the 9V battery level. When this battery is running low, it will sound a chirping tone approximately once every 60 seconds. Simply replace the 9V battery with a new one when this occurs.

Page 6
Image 6
SmartPool Inc PE13 warranty Battery Installation, Low Battery Indicator