![](/images/new-backgrounds/1202379/20237973x1.webp)
MOUNTING
To
1.Attach the brackets to the device using the screws provided in the Bracket Mounting Kit.
PWR
Diag
M1
M2
Figure 3-2. Attaching the Brackets
2.Mount the device in the rack, using four
PWR
Diag
M1
M2
Figure 3-3. Installing the Switch in a Rack
3.If installing a single switch only, turn to “Connecting to a Power Source” at the end of this chapter.
4.If installing multiple switches, mount them in the rack, one below the
other, in any order.