SPANNING TREE ALGORITHM CONFIGURATION

-Learning - Port has transmitted configuration messages for an interval set by the Forward Delay parameter without receiving contradictory information. Port address table is cleared, and the port begins learning addresses.

-Forwarding - Port forwards packets, and continues learning addresses.

•Trunk – Indicates if a port is a member of a trunk. (STA Port Configuration only)

The following interface attributes can be configured:

•Spanning Tree – Enables/disables STA on this interface. (Default: Enabled).

•Priority – Defines the priority used for this port in the Spanning Tree Protocol. If the path cost for all ports on a switch are the same, the port with the highest priority (i.e., lowest value) will be configured as an active link in the Spanning Tree. This makes a port with higher priority less likely to be blocked if the Spanning Tree Protocol is detecting network loops. Where more than one port is assigned the highest priority, the port with lowest numeric identifier will be enabled.

-Default: 128

-Range: 0-240, in steps of 16

•Path Cost – This parameter is used by the STP to determine the best path between devices. Therefore, lower values should be assigned to ports attached to faster media, and higher values assigned to ports with slower media. (Path cost takes precedence over port priority.) Note that when the Path Cost Method is set to short (page 3-63), the maximum path cost is 65,535.

-Range:

-Ethernet: 200,000-20,000,000

-Fast Ethernet: 20,000-2,000,000

-Gigabit Ethernet: 2,000-200,000

3-139

Page 186 Page 188
Page 187
Image 187
SMC Networks SMC6752AL2 manual 139
Page 186 Page 188

SMC6752AL2 specifications

The SMC Networks SMC6752AL2 is a robust and versatile gigabit Ethernet switch designed to cater to the demands of medium to large enterprise networks. This switch delivers an impressive combination of performance, flexibility, and manageability, making it an ideal solution for businesses seeking to enhance their network infrastructure.

One of the standout features of the SMC6752AL2 is its 48 Gigabit Ethernet ports, allowing for high-speed network connections to a variety of devices such as servers, workstations, and other networked equipment. Additionally, the switch includes 4 SFP (Small Form-factor Pluggable) slots that provide options for connecting to other networking devices via fiber optics, enhancing the versatility of the network configuration.

The SMC6752AL2 supports advanced Layer 2 switching capabilities, which are crucial for efficient data handling and traffic management. With features such as VLAN (Virtual Local Area Network) support, the switch can segment network traffic to improve performance and security while effectively managing broadcast domains. It supports 802.1Q VLAN tagging, allowing for better network segmentation and isolation of different types of traffic.

Moreover, the switch is equipped with Quality of Service (QoS) features to prioritize critical data transmissions. This is essential for applications requiring real-time data flow, such as VoIP (Voice over Internet Protocol) and video conferencing. The SMC6752AL2's QoS capabilities enable users to classify and prioritize traffic, ensuring a smooth and seamless experience for bandwidth-intensive applications.

The SMC6752AL2 also includes features such as port mirroring and link aggregation, enhancing the monitoring and management capabilities of the network. Port mirroring allows administrators to duplicate traffic from one port to another for analysis and troubleshooting, while link aggregation enables combining multiple connections for increased bandwidth and redundancy.

In terms of security, the switch supports802.1X port-based authentication, providing a layer of network access control that ensures only authorized users can connect. This feature, combined with the ability to create access control lists (ACLs), helps to safeguard the network against unauthorized access and other potential threats.

Overall, the SMC Networks SMC6752AL2 is a feature-rich Ethernet switch that offers reliable performance and advanced capabilities for managing enterprise networks. Its combination of port density, layer 2 switching features, QoS functionalities, and enhanced security makes it an excellent choice for organizations looking to expand or upgrade their networking solutions. With the SMC6752AL2, businesses can maintain high-performance connectivity and effective network management tailored to their specific operational needs.
Top Page Image Contents