SMC Networks SMC6752AL2 manual Telnet Settings

CONFIGURING THE SWITCH

CLI – Enter Line Configuration mode for the console, then specify the connection parameters as required. To display the current console port settings, use the show line command from the Normal Exec level.

Console(config)#line console		4-15
Console(config-line)#login local		4-16
Console(config-line)#password 0 secret		4-17
Console(config-line)#timeout login response 0		4-18
Console(config-line)#exec-timeout 0		4-19
Console(config-line)#password-thresh 3		4-20
Console(config-line)#silent-time 60		4-21
Console(config-line)#databits 8		4-22
Console(config-line)#parity none		4-23
Console(config-line)#speed 115200		4-23
Console(config-line)#stopbits 1		4-24
Console(config-line)#end
Console#show line		4-25
Console configuration:
Password threshold:	3 times
Interactive timeout:	Disabled
Login timeout:	Disabled
Silent time:	60
Baudrate:	115200
Databits:	8
Parity:	none
Stopbits:	1
VTY configuration:
Password threshold:	3 times
Interactive timeout:	600 sec
Login timeout:	300 sec
Console#

Telnet Settings

You can access the onboard configuration program over the network using Telnet (i.e., a virtual terminal). Management access via Telnet can be enabled/disabled and other various parameters set, including the TCP port number, timeouts, and a password. These parameters can be configured via the web or CLI interface.

Command Attributes

•Telnet Status – Enables or disables Telnet access to the switch. (Default: Enabled)

•Telnet Port Number – Sets the TCP port number for Telnet on the switch. (Default: 23)

3-30