SPANNING TREE ALGORITHM CONFIGURATION

•Designated Root – The priority and MAC address of the device in the Spanning Tree that this switch has accepted as the root device.

-Root Port – The number of the port on this switch that is closest to the root. This switch communicates with the root device through this port. If there is no root port, then this switch has been accepted as the root device of the Spanning Tree network.

-Root Path Cost – The path cost from the root port on this switch to the root device.

•Configuration Changes – The number of times the Spanning Tree has been reconfigured.

•Last Topology Change – Time since the Spanning Tree was last reconfigured.

These additional parameters are only displayed for the CLI:

•Spanning tree mode – Specifies the type of spanning tree used on this switch:

-STP: Spanning Tree Protocol (IEEE 802.1D)

-RSTP: Rapid Spanning Tree (IEEE 802.1w)

•Priority – Bridge priority is used in selecting the root device, root port, and designated port. The device with the highest priority becomes the STA root device. However, if all devices have the same priority, the device with the lowest MAC address will then become the root device.

•Root Hello Time – Interval (in seconds) at which this device transmits a configuration message.

•Root Maximum Age – The maximum time (in seconds) this device can wait without receiving a configuration message before attempting to reconfigure. All device ports (except for designated ports) should receive configuration messages at regular intervals. If the root port ages out STA information (provided in the last configuration message), a new root port is selected from among the device ports attached to the network. (References to “ports” in this section means “interfaces,” which includes both ports and trunks.)

3-127

Page 174 Page 176
Page 175
Image 175
SMC Networks SMC6752AL2 manual 127
Page 174 Page 176

SMC6752AL2 specifications

The SMC Networks SMC6752AL2 is a robust and versatile gigabit Ethernet switch designed to cater to the demands of medium to large enterprise networks. This switch delivers an impressive combination of performance, flexibility, and manageability, making it an ideal solution for businesses seeking to enhance their network infrastructure.

One of the standout features of the SMC6752AL2 is its 48 Gigabit Ethernet ports, allowing for high-speed network connections to a variety of devices such as servers, workstations, and other networked equipment. Additionally, the switch includes 4 SFP (Small Form-factor Pluggable) slots that provide options for connecting to other networking devices via fiber optics, enhancing the versatility of the network configuration.

The SMC6752AL2 supports advanced Layer 2 switching capabilities, which are crucial for efficient data handling and traffic management. With features such as VLAN (Virtual Local Area Network) support, the switch can segment network traffic to improve performance and security while effectively managing broadcast domains. It supports 802.1Q VLAN tagging, allowing for better network segmentation and isolation of different types of traffic.

Moreover, the switch is equipped with Quality of Service (QoS) features to prioritize critical data transmissions. This is essential for applications requiring real-time data flow, such as VoIP (Voice over Internet Protocol) and video conferencing. The SMC6752AL2's QoS capabilities enable users to classify and prioritize traffic, ensuring a smooth and seamless experience for bandwidth-intensive applications.

The SMC6752AL2 also includes features such as port mirroring and link aggregation, enhancing the monitoring and management capabilities of the network. Port mirroring allows administrators to duplicate traffic from one port to another for analysis and troubleshooting, while link aggregation enables combining multiple connections for increased bandwidth and redundancy.

In terms of security, the switch supports802.1X port-based authentication, providing a layer of network access control that ensures only authorized users can connect. This feature, combined with the ability to create access control lists (ACLs), helps to safeguard the network against unauthorized access and other potential threats.

Overall, the SMC Networks SMC6752AL2 is a feature-rich Ethernet switch that offers reliable performance and advanced capabilities for managing enterprise networks. Its combination of port density, layer 2 switching features, QoS functionalities, and enhanced security makes it an excellent choice for organizations looking to expand or upgrade their networking solutions. With the SMC6752AL2, businesses can maintain high-performance connectivity and effective network management tailored to their specific operational needs.
Top Page Image Contents