SMC Networks SMC6752AL2 manual Setting an IP Address

INITIAL CONFIGURATION

2.Type “configure” and press <Enter>.

3.Type “username guest password 0 password,” for the Normal Exec level, where password is your new password. Press <Enter>.

4.Type “username admin password 0 password,” for the Privileged Exec level, where password is your new password. Press <Enter>.

Note: ‘0’ specifies the password in plain text, ‘7’ specifies the password in encrypted form.

Username: admin

Password:

CLI session with the SMC6752AL2 is opened.

To end the CLI session, enter [Exit].

Console#configure

Console(config)#username guest password 0 [password]

Console(config)#username admin password 0 [password]

Console(config)#

Setting an IP Address

You must establish IP address information for the switch to obtain management access through the network. This can be done in either of the following ways:

Manual — You have to input the information, including IP address and subnet mask. If your management station is not in the same IP subnet as the switch, you will also need to specify the default gateway router.

Dynamic — The switch sends IP configuration requests to BOOTP or DHCP address allocation servers on the network.

2-6