M
ENU
O
VERVIEW
3-5
Admin Privilege
WAN Status Displays the IP address, subnet mask, and MAC address
associated with each ATM Virtual Circuit (VC). Provides
release/renew IP address option.
PPP Status Displays the status of PPP links for each VC.
TCP Status Displays the status of overall TCP traffic.
Route Table Configures static routes.
Learned MAC Addr.By examining the MAC source address of each received
frame, and recording the port on which it was received, the
Barricade learns the location of specific nodes and only
forwards frames which need to travel from one LAN to
another.
ADSL
Configuration
Configures basic ADSL connection parameters, including
Trellis encoding, handshaking protocol, and wiring option.
RIP Configuration Configures RIP unicast routing for TPC/IP access to the
Internet.
Password
Configuration
Sets a password for read/write access for the administrator,
or for read-only access for a guest.
Misc Configuration Enables WAN-side HTTP/FTP/TFTP servers, DMZ
access for a specified client, DNS proxy, DHCP relay,
IGMP Proxy, and SNMP community strings
Reset to Factory
Default
Restores the original factory settings.
Diagnostic Test Runs a diagnostic tes t on the LAN connection, and for each
PVC used in the ADSL connection.
Code Image Update Downloads new firmware to the Barricade, using a file
selected from the network.
Network Code
Image Update
Downloads new firmware to the Barricade directly from
your distributor’s support site.
System Log All key configuration changes or detected errors are
recorded in this log.
Reboot Writes the current configuration settings to flash memory
and reboots the system.
Menu Description