I
NSTALLATION
2-8
Notes: 1. Use 100-ohm straight-through shielded or unshielded
twisted-pair cable with RJ-45 connectors at both ends for all
connections. Use Category 3, 4, or 5 for 10 Mbps connections,
or Category 5 for 100 Mbps connections.
2. Make sure each twisted-pair cable does not exceed 100 meters
(328 feet).
Warning: Do not plug a phone jack connector into any RJ-45 port. This
may damage the Barricade. Use only twisted-pair cables with
RJ-45 connectors that conform with FCC standards.
Connect to the Barricade’s USB Port
1. Insert the square (B-type) USB plug of the USB cable into the USB
port at the back of the modem and the rectangular (A-type) USB plug
into the USB port at the back of the computer.
2. The “Found New Hardware” screen will appear. Insert the driver disk.
When prompted for the location of the driver, enter the drive letter of
your CD drive.
3. Follow the instructions given to install the driver.
4. Reboot your computer if prompted. The modem may take from 1~5
minutes to initialize and establish a connection.
5. Start your browser or other Internet application.