C
ONFIGURING
C
LIENT
TCP/IP
4-10
that your IP address is now 192.168.1.xxx, your Subnet Mask is
255.255.255.0 and your Default Gateway is 192.168.1.1. These values
confirm that your ADSL Router is functioning.
4. Type “EXIT” and press <ENTER> to close the “Command Prompt”
window.
Your computer is now configured to connect to your ADSL Router.
Windows NT 4.0
Step 1. Configure TCP/IP Settings
After completing hardware setup by connecting your network devices, you
need to configure your computer to connect to the Barricade. First
determine how your ISP issues your IP address. Many ISPs issue these
numbers automatically using Dynamic Host Configuration Protocol
(DHCP). Other ISPs provide a static IP address and associated numbers,
which you must enter manually. How your ISP assigns your IP address
determines how you need to configure your computer.