A
DMIN
P
RIVILEGE
3-23Route Table

This screen is used to manually configure static routes to other IP

networks, subnetworks, or hosts.

Parameter Description
Destination A destination network or specific host to which packets
can be routed.
Gateway The IP address of the router at the next hop to which
matching frames are forwarded.
Netmask The subnetwork associated with the destination.
This is a template that identifies the address bits in the
destination address used for routing to specific subnets.
Each bit that corresponds to a “1” is part of the network/
subnet number; each bit that corresponds to “0” is part of
the host number.
Interface The local interface through which the next hop of this
route is reached. Values include:
cs0: Interface of ethernet port.
ppp0: Interface of PVC when the PVC is set to PPP/
ATM mode.
lo0: Interface of the loopback driver.
Action Add or delete a route from the table.