SYSTEM REQUIREMENTS

Supports ITU-T VDSL/VDSL2 and ANSI T1E1.4 Part 1 VDSL interface standards, as well as other evolving ETSI, ANSI, and ITU VDSL standards for the copper local loop

Spectral compatibility with VDSL, VDSL2, ADSL, ADSL2+, ISDN (2B1Q/4B3T), Smartphone digital PBX extensions and narrowband interference

Robust operation on severely distorted lines

Supports power back-off algorithm that permits a mixed distance deployment

LEDs indicate VDSL link status, and power

Simple plug-and-play installation

Additional VDSL2 features (CPE side) include:

Fast startup for quick initialization

Trellis coding modulation for higher performance

Seamless rate adaption for enhanced quality in video applications

Variable tone spacing enables best performance for long and short reach lines

Improved framing, overhead channel, and interleaving

System Requirements

Before you start installing the CPE, make sure you can provide the right operating environment. See the following installation requirements:

A PC or Macintosh with a 10/100 Mbps Ethernet adapter card installed.

For Internet access, the computer must be configured for TCP/IP.

1-5

Page 19
Image 19
SMC Networks SMC7800A/VCP manual System Requirements