APPENDIX C
SPECIFICATIONS
VDSL Functional Criteria
Band Plan: Up to 6 bands
Signal Bandwidth: 25 kHz to 30MHz
Optional Band: US0 operating at 4~25 kHz (low end) to 138~276 kHz (high end)
Multi-Carrier-Modulation (MCM) - DMT modulation Interleaving: general convolution
Tone Spacing: 8.6 kHz
Upstream Power Back-off (UPBO) Remote firmware upgrade
Physical Characteristics
Ports
1 RJ-11 VDSL line (to phone jack in the wall)
1 RJ-11 phone line (POTS connection to telephone)
1 RJ-45 10/100BASE-TX (Ethernet connection to PC or gateway)
Ethernet Interface
RJ-45 connector, auto MDI/X pinout detection 10BASE-T: 100-ohm, UTP cable; Category 3 or better 100BASE-TX: 100-ohm, UTP cable; Category 5 or better
* Maximum Cable Length - 100 m (328 ft)
VDSL2 Interface
RJ-11 connector, using standard phone cable (26 AWG)