ADVANCED SETUP
PPPoA
Parameter | Description |
|
|
VPI/VCI | Enter the Virtual Path Identifier (VPI) and Virtual |
| Circuit Identifier (VCI) supplied by your ISP. |
Encapsulation | Select the encapsulation used by ISP from the drop |
| down list. |
QoS Class | ATM QoS classes including CBR, UBR and VBR |
PCR/SCR/MBS | QoS Parameters - PCR, SCR and MBS are |
| configurable. |
IP assigned by ISP | Select Yes if the IP address was provided by your |
| ISP |
IP Address | Enter the IP address provided by your ISP. |
Subnet Mask | Enter the subnet mask address provided by your |
| ISP. |
Connect Type | Sets connection mode to always connected, |
| automatic or manual connection. |
Idle Time (Minute) | Enter the maximum idle time for the Internet |
| connection. After this time has been exceeded the |
| connection will be terminated. |
Username | Enter user name. |
Password | Enter password. |
Confirm Password | Confirm password |
MTU | Leave the Maximum Transmission Unit (MTU) at |
| the default value (1500) unless you have a |
| particular reason to change it. |
|
|
