ADVANCED SETUP
RIP
Parameter | Description |
|
|
General RIP Parameters |
|
RIP mode | Globally enables or disables RIP. |
Auto summary | If Auto summary is disabled, then RIP packets will |
| include |
| networks connected to the router. If enabled, this |
| |
| one piece of information covering all sub- |
| networks. |
Table of current Interface RIP |
|
parameter |
|
Interface | The WAN interface to be configured. |
Operation Mode | Disable: RIP disabled on this interface. |
| Enable: RIP enabled on this interface. |
| Silent: Listens for route broadcasts and updates its |
| route table. It does not participate in sending route |
| broadcasts. |
Version | Sets the RIP (Routing Information Protocol) |
| version to use on this interface. |
