SMC Networks SMC7908VoWBRA manual 4-55, Intrusion Detection Intrusion Detection Feature

Models: SMC7908VoWBRA

1 137
Download 137 pages 45.48 Kb
Page 89
Image 89
Intrusion Detection

ADVANCED SETUP

Intrusion Detection

Intrusion Detection Feature

Stateful Packet Inspection (SPI) and Anti-DoS firewall protection (Default: Enabled) — The Intrusion Detection Feature of the Barricade Router limits access for incoming traffic at the WAN port. When the SPI feature is turned on, all incoming packets will be blocked except for those types marked in the Stateful Packet Inspection section.

RIP Defect (Default: Enabled) — If an RIP request packet is not acknowledged to by the router, it will stay in the input queue and not be released. Accumulated packets could cause the input queue to fill, causing severe problems for all protocols. Enabling this feature prevents the packets from accumulating.

Discard Ping to WAN (Default: Disabled) — Prevent a ping on the Barricade’s WAN port from being routed to the network.

Scroll down to view more information.

4-55

Page 89
Image 89
SMC Networks SMC7908VoWBRA manual 4-55, Intrusion Detection Intrusion Detection Feature