2.2 Rear Panel Description
Wireless Card
LAN
Ports CATV
PowerConnector
|
| Reset |
| USB |
|
|
| Button |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
Item | Description |
|
|
|
|
Power | Connect the included power adapter to this port. |
|
| ||
Reset | Use this button to reset the power or restore the default factory settings. | ||||
LAN | Four 10/100 | ||||
| area network to these ports (such as a PC, hub, or switch). | ||||
USB | Connect a USB Cable from your PC to this port. |
|
| ||
CATV | Connect your cable line to this port. |
|
| ||
Wireless Card | Provides Wireless Signal for wireless clients. |
|
| ||
2.3 Rebooting and Restoring the Wireless Cable Modem Gateway
The Reset button is located on the rear panel of the EZ Connect™ Wireless Cable Modem Gateway. Use a paper clip or a pencil tip to push the Reset button.
Reboot
If the Gateway is having problems connecting to the Internet, simply hold down the reset button for less than 2 seconds then release.
Restore Factory Defaults
If rebooting the Wireless Cable Modem Gateway does not resolve your issue, then you can follow these steps:
1.Leave power plugged into the Wireless Cable Modem Gateway.
2.Locate the reset button on the back panel, press and hold button for at least 5 seconds.
3.Release reset button.
