SMC Networks SMC8013WG manual Configuring Windows

4.2 Configuring Windows 2000

1.Access your Network settings by clicking [Start], choose [Settings], and then select [Control Panel]

2.In the Control Panel, locate and double- click the [Network and Dial-up Connections] icon

3.Locate and double-click the [Local Area Connection] icon for the Ethernet adapter that is connected to the Gateway. When the Status dialog box window opens, click the [Properties] button.

4.On the [Local Area Connection] Properties box, verify the box next to Internet Protocol (TCP/IP) is checked.

Then highlight the Internet Protocol (TCP/IP), and click the Properties button.

5.Select Obtain an IP address automatically to configure your computer for DHCP. Click the [OK] button to save this change and close the Properties window.

6.Click the [OK] button again to save these new changes.

7.Reboot your PC.