Command DHCPSHOW: "dhcpShow"
Description: This command is used to show the current dhcp lease info, including the IP, MAC and status (online/expired/released) of the private LAN. There is no parameter for this command. It will show the IP, MAC, and
NOTE: If CPE has the successful IP lease and CM reboots at this stage, since the reboot time is short, CPE won't renew its IP and will just keep the old IP. This IP lease won't be shown by this dhcpShow command. In order to see this CPE lease, testers must force the CPE to perform renew operation.
Command LANPOLL: "lanpoll"
Description: Checks all
NOTE: The parameters in {....}, such as {AB}, means it could be optional between A and B, but must be one of them. The parameters in [..], like [count], means the count parameter could be neglected and a default value or would behavior be used.