INSTALLING AND CONFIGURING NETWORK DRIVERS

Windows NT 4.0 InstallationFirst-time installation

If you've already installed a network card, configured Windows NT Networking, or configured a network driver, refer to the procedure titled “Secondary Installation.”

1.If Windows NT is already installed on your computer, proceed to Step 2. Otherwise, complete a first-time Windows NT installation without the SMC network card installed.

2.Shut down your PC, install the SMC network card, and attach the network cable. Restart Windows NT.

3.Double-click on the “My Computer,” “Control Panel,” and “Network” icons. The “Network Configuration” window appears, prompting you to install Windows NT Networking. Select “Yes.” Windows NT invokes the “Network Setup Wizard.” Click on “Next.”

4.When prompted to “Search for a Network Adapter,” click on “Select from List.”

5.When prompted to “Select a Network Adapter,” click on “Have Disk.” Insert the SuperDisk when prompted and click on “OK.”

6.You are presented with the “Select OEM Option” window. Highlight “EtherPower II 10/100” and click on “OK.”

7.When prompted to “Search for an Adapter,” click on “Next.”

8.Select network protocols when prompted and click “Next.”

Note: To complete a TCP/IP installation, you will need to know your IP Address and Subnet Mask. For further information, contact your network administrator or Internet service provider.

3-4