USING EZSTART

Installing EZStart

The EZStart utility can be run from the SuperDisk or the hard disk. EZStart can also be installed and run using Microsoft Windows for Workgroups 3.x by double-clicking on the EZStart icon.

Windows 95/98, Windows NT, or OS/2 Installation

Exit Windows NT or shut down Windows 95/98 and reboot your computer to the DOS prompt (not a DOS window). Follow the instructions for installing and running EZStart in a DOS environment.

Hard Disk Installation in a DOS Environment

To run EZStart under DOS without using the SuperDisk, or to run EZStart from your Windows desktop, use the following procedure to load EZStart on your hard disk.

1.Insert the SuperDisk in a drive.

2.Using the DOS COPY command, copy all the files from the SuperDisk to a single directory on the hard disk. For example:

C:\> COPY A:\*.* C:\SMC <Enter>

Installation in a Windows 3.x Environment

1.Load EZStart on the hard disk as described above.

2.Start Microsoft Windows.

3.From the Program Manager, select “File,” “New,” and then “Program Item.”

5. Select “OK.”

D-3