INSTALLING AND CONFIGURING NETWORK DRIVERS

2.Double-click on the “My Computer,” “Control Panel,” and “Network” icons. From the “Network” window, select the Adapter tab.

3.Do not select any of the network cards listed. Select “Add.”

4.You are presented with the “Select Network Adapter” window. Click on “Have Disk.”

5.You are presented with the “Insert Disk” window. Specify the path to the root directory of the SuperDisk (e.g., A:\) and click on “OK.”

6.You are presented with the “Select OEM Option” window. Highlight “EtherPower II 10/100” and click on “OK.”

7.You are presented with the “Network Card Setup” window where you can specify the network card data rate. “AUTONEGOTIATE” is the recommended setting for the EtherPower II 10/100 network card. Select “OK” after verifying network card settings.

8.You are presented with the “Network” window where the SMC network card is now listed as an installed adapter. At this point you can select “Close” to exit the Network applet and follow the prompts to restart Windows NT.

9.Select “Yes” when prompted to reboot for the changes to take effect.

For Further Customization

You can modify card settings via the “Network” applet. Install additional protocols and network components by selecting the appropriate folder (e.g., Customizing Protocols, Services, Identification, or Bindings).

3-6