INSTALLING AND CONFIGURING NETWORK DRIVERS

6.The message “The file netapi.dll on SMC SuperDisk could not be found” appears. Specify the path to the Windows 95/98 CD (or the Windows 95/98 path you have designated), and click on “OK”.

6.You may be prompted for Windows 95/98 installation files. If so, click on “OK” and then type the path to your Windows 95/98 CD, or change the path to those files on your hard drive, and click “OK”.

7.Follow the remaining Windows 95/98 instructions to complete the installation. After all the files have been copied, you are prompted to reboot for the changes to take effect. Select “Yes” when prompted to restart your computer, and remove the SMC SuperDisk.

Optional procedures to modify card settings and add network protocols

KDouble-click on the “My Computer”, “Control Panel”, and “Network” icons. The “Network” dialog box appears. If the correct network protocols are not installed in the “Primary Network Logon” list box, select the primary network to which you will be attaching. Click on “Add”. The “Select Network Component Type” dialog box appears. Follow the on-screen directions to select network protocols.

KFor peer-to-peer networks, you may wish to enable “File and Print Sharing” in the “Network” dialog box.

KTo modify other network card properties, select the appropriate tab or click on the “Properties” button from the “Network” dialog box and modify properties as desired.

3-3