SMC Networks SMCHT-ETH guide

Setting Up Security on a Network HomePlug device

The Privacy Tab will allow users to use one primary computer to control the Network Password of all units on the home network.

First locate the DEK (Device Encryption Key) Key printed on the bottom of each device then enter this Key into the Device Password area on the Main Tab. Click ‘Add’. This Device Key will then appear in the bottom window. Add all the DEK Keys for each unit in your house. Now you can go back to the Main Tab then change the password remotely from one computer using PowerPacket Utility. This will allow you to change the password from one computer, instead of changing the password individually.

**Note** DEK is unique for EACH HomePlug device. To use this feature, you will need to input the DEK for each unit.

Page 14

Image 14

SMC Networks SMCHT-ETH manual Setting Up Security on a Network HomePlug device

Contents

Page Copyright Trademarks Table of Content Introduction Features and BenefitsPackage Contents System Requirements Panel Front Back Overview InstallationRunning the InstallShield Wizard Page Page Hardware Setup See below for example Configuration Diagnose Powerline network Diagnose a Local HomePlug Device Part 2 Diagnose a Network HomePlug device Setting Up Security on a Local HomePlug device Setting Up Security on a Network HomePlug device Appendix a Troubleshooting Frequently Asked Questions Dynamic IP Addressing What is an IP Address?Appendix B IP Addressing Static IP Addressing Appendix C Glossary RJ-45 Powerline NetworkingPassword Router Appendix D Product Specification Appendix E Compliances FCC Statement Tesla Irvine, CA Phone 949