Failure | Possible cause | Remedy |
Detergent residues | Low water flow pressure. | • Clean the inlet pipe screen. |
in the dispenser. | Some detergents may stick | • Wipe the dispenser prior |
| to the dispenser rather hard | loading detergent. |
| if it is wet. |
|
Softener is not | Sucking cover is not correctly | Clean the dispenser and firmly fix |
completely rinsed, | positioned or is clogged. | the cover to its place. |
or water is left in |
|
|
the dispenser dish. |
|
|
Washing time is | The machine switched on | Washing program time may be |
longer than usual. | the UKS* system because of | prolonged for 10 minutes and the |
| uneven laundry load. | machine still functions perfectly. |
| Power failure occurred. | Time is prolonged for the power |
| Clean water sensor is | failure period. |
| engaged. | Time is prolonged for extra |
|
| rinses. |
Washing program | Door is not properly closed. | Push it towards the machine. |
does not start. |
|
|
FAILURE 2 |
|
|
Water does not | Disturbed water inlet. | Check if: |
enter the machine. |
| • the water faucet is open, |
FAILURE 3 |
| • inlet pipe net filter is clean. |
|
| (Push the START button again). |
Water is poorly | Water outlet is clogged. | Check if: |
pumped out or not |
| • the filter is clean, |
at all (machine |
| • outlet pipe is not jammed, |
signals |
| • outlet pipe is positioned higher |
FAILURE 7). |
| than 1 m. |
| (Push START knob again). | |
|
|
* UKS: universal stability control - this function prevents excessive vibrations during spinning.
In case you were not successful in repairing the malfunctions in spite of the above suggestion chart, call the nearest authorized service shop.
Repairing the failure arising from inappropriate connections or use of the appliance is not covered by the guarantee, and the repair expenses are paid by the customer.
155620
31
