in bold (spin RPM, extra rinse, more water, sound signal). Using the SELECTION knob (C) you may change settings. Activation of a particular function is confirmed by the relevant symbol appearing on the display. Function is deactivated by another pressing the SELECTION knob (C).
Reduced spin RPM / Rinse hold |
| ||
Best recommended spin RPM for the selected |
| ||
program appear on the display. Using the button (C) |
| ||
in some models you can increase the selected RPM |
| ||
| |||
spins are off. Last selection is “pump stop” meaning |
| ||
that laundry will remain soaked in the last rinse |
| ||
water. |
|
|
|
RINSE HOLD function is selected if you want the |
| ||
laundry not to be excessively creased in case you |
| ||
are unable to remove it from the drum immediately |
| ||
after the end of washing cycle. This is specially |
| ||
handy for washing of synthetics and delicate |
| ||
laundry | . However, it is not recommended for |
| |
wool | or manual wash . |
| |
Extra rinse/ | Clean water sensor |
| |
This function is for persons, especially sensitive |
| ||
to detergents. Using the SELECTION knob (C) |
| ||
you may select one or two extra rinses, or activate |
| ||
the Clean water sensor (S) - certain models only. |
| ||
By activating extra rinse the display indicates |
| ||
adequately increased quantity of water. If the clean |
| ||
water sensor is activated, the display indicates the |
| ||
symbol “S” instead of water quantity. In such cases |
| ||
the machine will select appropriate number of rinses |
| ||
in relation to how clean is rinsing water, detected |
| ||
(measured) by the sensor. |
| ||
Higher water level (Water plus) |
| ||
For washing heavily stained laundry. |
| ||
Using the SELECTION knob (C) you may increase | 155620 | ||
quantity of water for rinsing one or two times more; | |||
15
