Smeg 155620 manual Pumping the water out, Spinning, Start the operation

Pumping the water out

Use it when the washing program was interrupted or if pump stop function was engaged, and you only wish to pump the water out of the drum, without spinning.

Spinning

Aggressive spinning for non-delicate laundry at high spin RPM.

Spin revolutions can be altered.

-Adding washing and softening agents (see tips for washing and energy saving)

• pre-wash compartment

• main wash compartment

• softener compartment

If you do not apply the program which includes the pre-wash feature, you may add washing detergent directly into the drum, using the measuring vessel.

When adding softener, be careful to fill the dispenser only up to the marked level.

Be sure to close the detergent dispenser when opening/closing the appliance door.

Start the operation

155620

Program is activated by pushing the START/PAUSE button (F). Sound signal confirms the start, the display indicates first washing stage and time

left to the end of washing. Washing stages are consecutively displayed in accordance with the selected program.

If the machine is set with the delayed start, it will start operating after the delay time expires.

If the pump stop function was set, the program will stop at the final rinse and the display indicates flashing sign pump stop (RINSE).

You may conclude the program by pressing the

20