Smeg A1-6 manual Cleaning of the oven, Instructions for the user, Ignition plugs and thermocouples

Instructions for the user

10.2.2Burner caps, flame cap crowns and burners

To facilitate cleaning, caps, flame cap crowns, and burners are all removable. To remove the flame separating crown of the fish hob, loosen the two screws exposed after having removed the cap. Wash all parts with warm water and non-abrasive detergent taking care to remove all tough spots. Wait for all parts to be fully dry before remounting.

Replace the flame-spreader crowns, checking that they are positioned in their housing with their respective caps, taking care that flame-spreader holes A correspond to the spark plugs and the thermocouples.

10.2.3Ignition plugs and thermocouples

To work well, the ignition plugs and thermocouples must always be very clean. Check them frequently and clean them with a wet rag if necessary. Any dry residue should be removed with a toothpick or a needle.

10.3 Cleaning of the oven

For best oven upkeep clean regularly after having allowed to cool. Take out all removable parts.

Remove the side runners by lifting them at the front and extracting them from the hole at the back.

•DO NOT USE A STEAM JET FOR CLEANING THE INSIDE OF THE OVEN.

•Clean the oven grill and side guides with hot water and non-abrasive detergent. Rinse and dry.

62