Smeg A3SX manual Instructions for the user, Barbecue drip tray, 10.2.3Grids

Instructions for the user

10.2.2 Barbecue drip tray

To remove the drip tray under the barbecue element:

1.Remove the griddle as described in point 10.2.1;

2.Raise the heating element and fix it in place by sliding the retainer to the right (as shown in the adjacent diagram);

3.Remove the drip tray using the two handles and clean using specific detergents for stainless steel and a non-abrasive sponge.

10.2.3Grids

Remove the right-hand pan stands (griddle + fish burner) as shown in the diagram. There is no special order for removal of the left-hand pan stands. Clean the pan stands in warm water and non-abrasive detergent, taking care to remove all deposits. Replace, fitting first the outside pan stand then the griddle.

10.2.4Burner caps, flame cap crowns and burners The burner caps, flame cap crowns and burners are extractable to facilitate cleaning. Wash them with hot water and non-abrasive detergent, taking care to remove incrustation, and leave them to dry completely. Reassemble the burner caps on their crowns, ensuring that niches A are centred with burner pins B.

35