Smeg A41C-5 manual Instruction for wall fixing only on some models, Instructions for the installer

Instructions for the installer

For operation on 380-415V3N∼: use an

H05RR-F-type five-core cable (5 x 2.5 mm2).

For operation on 380-415V2N∼: use an

H05RR-F-type four-core cable (4 x 4 mm2).

For operation on 220-240V∼: use an

H05RR-F-type three-core cable (3 x 6 mm2).

The cable end to be connected to the appliance must be provided with an ground wire (yellow-green) at least 20 mm longer.

Complete wiring up to power supply with an appropriately rated five-core plug (see data plate) or, in case of operation from a 220-240V∼power supply, with a three-core plug. Make sure that plug and wall socket are of the same type and are in conformity with regulations in force. Make sure that the appliance is properly earthed. Before powering, check that the power line is properly earthed. Avoid using adapters or shunters.

2.3Instruction for wall fixing (only on some models)

1)Fix the screw to the wall and hook the chain (B);

2)Hook the chain to the hole positioned at the rear of the cooker by the gas pipe (A);

3)Once the chain is in position, push the cooker against the wall;

4)The height of the screw hole from floor level must not exceed 800 mm (C).

ABC

33