Instructions for the user
7.3First use
At first use, or after a power failure, the oven's display (DSP1) will show a
flashing 
symbol. To be able to start any cooking function the current time must be set.
(For further information on setting or changing the current time see “7.6 Secondary menu”).
7.4Function selection
To select a cooking function, turn PT2.
Then use the PT1 knob to select the desired temperature
7.4.1 Cooking with preset temperature
Once the desired function has been selected, the oven will begin cooking at the
This phase is indicated by the symbol 
flashing on the display (DSP1).
At the end of the 
symbol will remain constantly on to indicate that the food can be placed inside the oven.
7.4.2 Changing the preset temperature
The temperature preset for each function can be changed to suit the user's requirements.
At any time while cooking is in progress, turn PT1 in either direction to increase or decrease the cooking temperature by 5 degrees at a time. PT1 can also be held in the left or right position to increase or decrease the setting more quickly.
7.5Programmed cooking procedures
7.5.1 Cooking timed with the timer
From ON status (see point “7.2 Operating modes”), press PT1 once. The
display will show the 
figures (constantly on) and the 
symbol (flashing). Turn PT1 to set the minutes of cooking (from 00:01 to
23:59:00). After a few seconds, the 
symbol will stop flashing and stay on constantly; the countdown will start from that moment. At this point it is also possible to select the cooking function required and wait for the buzzer to sound, indicating that the cooking time is over.
Press PT1 once to stop the buzzer. You can now set an additional cooking time by turning PT1, or return to display of the current time by pressing PT1 twice.
Turn PT2 to the “0” symbol to switch off the oven.
The minute minder also works with no function set.
41
