Smeg FC66N1 manual Change the settings in the secondary menu, Menu Modification Procedure, Symbols

Instructions for the user

7.6.1 Change the settings in the secondary menu

The secondary menu appears at first use, after a power failure or by holding PT1 down for 3 seconds with the oven in the OFF position (see point “7.2 Operating modes”).

Changing the parameters in the secondary menu is very simple. See the following diagram:

MENU MODIFICATION PROCEDURE	SYMBOLS
	Turn PT1 to the right
	to increase (+) the
	value or to set the
	ON status.
	Turn PT1 to the left
	to decrease (-) the
	value or to set the
	OFF status.
	Press PT1 to move to
	the	next setting in
	the	menu. After
	setting P3, press PT1
	to resume normal operation
	of the oven.

45