Instructions for the user
12.2 Removing the door 12.2.1 With type 1 movable levers
With the door completely open, lift
the levers A of the two hinges until they touch the hinges B and take
hold of the two sides of the door with both hands close to the hinges
themselves. Raise the door to an angle of about
45° and remove it. If the hinges have not locked, repeat the operation, raising the levers A and keeping the door slightly raised. To reassemble, fit the hinges B into their grooves, then lower the door into place, ensuring that it remains fitted into the grooves C, and lower the levers A.
12.2.2 Removing doors with pins
Open the door completely and insert the pins (supplied) into the holes from the inside. Close the door to an angle of about 45° and lift it off. To reassemble, fit the hinges into their grooves, then lower the door into place and extract the pins.
12.3 Removing the door seal
To permit thorough cleaning of the oven, the seal may be removed. Before removing the seal, take off the door as described above. Once the door has been taken off, lift the tabs at the corners as shown in the figure.
57
