Instructions for the user
5Strong
6Very strong
or fish.
For roasts, steaks and large boiled joints.
To boil large amounts of water, to fry.
WARNING
When switching on the electric element for the first time, or if the electric element has not been used for a long time, to remove any humidity from the insulating material it should be dried out by placing the electric element on position 1 for 30 minutes.
To use correctly remember to:
•Switch the electric element only after having placed the pan on it.
•Use flat and thick bottomed pans.
•Never use pans which are smaller than the electric element.
•Dry the bottom of the pan before placing it on the electric element.
•When cooking with flammable oils and fats, never leave the appliance.
•The electric elements will stay hot for a long time after use: do not touch them or place any objects on them.
•If any dents appear in the electric element surface, switch it off immediately and contact the nearest authorised servicing centre.
•Never place sheets of aluminium foil directly on the surface of the hotplate.
7.5Using a griddle plate
A few precautions are necessary if you wish to use a griddle plate:
•leave a gap of at least 160 mm between the edge of the griddle plate and the side wall;
•if one of the burners close to the wooden rear wall is of triple flame type, leave a gap of at least 160 mm between this wall and the edge of the griddle plate;
•do not allow the burner flames to extend beyond the edge of the griddle plate;
•operate the burners underneath the griddle plate for 10 minutes at maximum power, then turn them down to the minimum setting. Never use the griddle plate for more than 45 minutes.
40
