GB | | | | INSTRUCTION ON | MOUNTING AND USE | |
Consult the designs in the front pages referenced in the text by | Failure to carry out the basic standards of the cleaning of the |
alphabet letters. | Closely follow the instructions set out in | cooker hood and replacement of the filters may cause fire risks. |
this manual. | All | responsibility, | for any eventual inconveniences, | Grease Filter – may be one of the following types: |
damages or | fires | caused by not complying with the instructions | Paper filter | must be replaced once a month or if coloured on |
in this manual, | is declined. | | | | | | | the top side, when the coloration is evident via the holes in the |
The cooker hood has an upper air duct B1 and an optional rear | grill. | | | | | | | |
Sponge filter should be washed once a month and replaced |
air duct B2*, for external fumes exit. | | | | | | every | 5/6 | washes. | | | |
Select the suitable air duct and apply the flange C supplied, | Metallic filter | must be cleaned once a month with suitable |
ensure to close the unused hole duct with | tap D* | supplied if | detergents either by hand or in dishwasher (65°C). | |
provided. | | | | | | | | | When washed in a dish washer, the grease filter may discolour |
Caution! In some models the rear hole duct is not easily | slightly, | but | this does not affect | its filtering capacity. | |
In order to remove the grease filter | open the grill via the P hooks |
accessible, even when the tap (if mounted) is removed, in this | and free the R1 or R2 stoppers. | | | |
case remove the plastic piece E1 or E2 that is blocking the hole | The self-supporting metal filter does not include a support |
duct, by unwinding using pliers and cutter. | Check that the filter/ | grill, in order to remove the filter – pull the release springs P4 |
suction selector | (inside the cooker hood) | G | is in the | suction | backwards and slide the filter downwards. | |
(A) position. | In | the case where it is not possible to discharge | Attention! | the metal filter may discolour if washed in dishwasher |
the cooking fumes externally, the cooker hood may be used in | but the | filtering | performance is unaltered. | |
the filter version | by fixing a carbon filter, the fumes and vapours | Carbon Filter - it may be one of the following types: | |
are recycled via the anterior grill placed above the control panel. | |
Check that | the | suction/filter | selector | is | in the | filter | (F) | Rectangular S1 or S2 or S3: to be replaced every 6 months |
position. | | | | | | | | | Mounting (S1 or S2) : insert the rear | side T and hook further |
The models provided without suction motor | may function | only | to the front (U). | | | O knobs |
in the suction version and must be connected to a peripheral | Mounting (S3): | Remove the cover W by rotating the |
suction unit | (not | supplied). | | | | | | | to 90° | , | then | close the cover. | Proceed in the inverse for |
Installation - Do not tile, grout or silicone this appliance to the wall. | dismounting. | | | | |
Circular | (V1-V2-V3-various models): to be replaced every |
Surface mounting only. Do not fix chimney flue to furniture or fly | 4 months. | | | | | |
over shelves unless the chimney flue can | be easily removed, | Bayonet mount position the filter in the middle of the motor |
in case maintenance is ever required.The cooker hood must be | protection | grill covering ensuring that the reference to | X1 or X2 |
placed at a minimum distance of 60 cm from the cooking plane | or X3 on the carbon filter match the Y1 | or Y2 references on the |
for electric cookers and 75cm | for gas or | mixed cookers. | | conveyor, then turn clockwise; in case of dismounting turn |
If the instructions for installation for the gas hob specify a greater | anticlockwise, if provided with a Z tape remember to gently lift |
distance, this has to be taken into account. | | | | | first. | | | | | | | |
The cooker hood may be installed on the | wall or on the base | Replacing lightbulbs 40W - Unscrew the damaged light bulb and |
of a cabinet; if supplied, use the hole gauge | H to drill the correct |
distance, otherwise lean the cooker hood on the wall or on the | replace | with | an incandescent oval light bulb with a | maximum |
base of the cabinet and mark the holes with a pencil. | | | of 40W E14. Remove the grill in order to reach the light bulb area. |
Wall mounting - Insert the wall screw anchors J in the drilled holes | Replacing the hologen bulbs - Access the light compartment – |
and the two | K screws in the upper drill holes, remove the grill | extract the lamp cover by levering it off | with a small screwdriver |
and hook the cooker hood to the 2 screws, finally from the inside, | or similar | tool. | | | | |
insert the third screw L and lock them all | in. | | | | Warning! | Prior to touching the light bulbs ensure they are cooled |
Cabinet fixing - Affix the cooker hood with the 4 M screws from | down. Replace the damaged light bulb. Only use halogen bulbs |
of 20W max (G4), making sure you do not touch them with your |
inside the cabinet. | | | | | | | hands. Close the lamp cover (it will snap shut). | |
Electrical connection - The electrical tension must correspond | Caution - This appliance is designed to be operated by adults. |
to the tension noted on the label placed inside the cooker hood. | Children should not be allowed to tamper with the controls or play |
Connect the electrical plug, where provided, to the an easily | with the | appliance. | | | |
accessible outlet in conformity with local standards in force. | Do not use the cooker hood where the grill is not correctly fixed! |
Where an electrical plug is not | provided (for | direct | connection | The suctioned air must not be conveyed in the same channel |
to electrical network) place a standards approved bipolar switch | used for fumes discharged by appliances powered by other than |
with an aperture distance of not less than 3mm (accessible) from | electricity. | The environment | must | always be adequately |
the contacts. | | | | | | | | aerated when the cooker hood and other appliances powered |
Operation - The control panel is situated on the front of the cooker | by other than electricity are used at the same time. | Flambé |
cooking with a cooker hood is prohibited. The use of a free flame |
hood and is equipped with various suction | speeds. | | Use | the | is damaging to the filters and may cause fire accidents, therefore |
highest speed for situations of | high level vapour concentration | free flame cooking must be avoided. | Frying of foods | must be |
in cooking. Always open the vapour collector N*. It is | kept under close control in order to avoid overheated oil catching |
advisable to switch on the suction at least 5 minutes prior to | fire. Carry out fumes discharging in accordance with the |
cooking and leave it in operation for 15 minutes approximately | regulations in force by local laws for safety and technical |
after cooking is | terminated. | | | | | | | restrictions. | | | | | |
Maintenance - Prior to any maintenance operation ensure that | | | | | | | | |
the cooker hood is disconnected from the electrical outlet. | | | | | | | | |
Cleaning - The cooker hood should be cleaned regularly | | | | | | | | |
internally and externally. For cleaning use a cloth moistened | | | | | | *Notavailableonallmodels. |
with denatured | alcohol or neutral liquid | detergents. | Avoid | | | | | |
abrasive detergents. | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | |
