Manuals / Smeg / Kitchen Appliance / Cooktop

Smeg PGF75BE3, PGF75-3 manual Instructions for the installer, Refer to installation instruction

Models: PGF75-3 PGF75BE3

1 16

Download 16 pages 30.08 Kb

Page 6

Image 6

Instructions for the installer

Important: Other types of installation will only be possible under the manufacturer's supervision.

Overall dimensions: location of gas and electrical connection points (all measures in mm).

Caution: surface temperature underneath may exceed 125 degrees C. To avoid a hazard, under-bench access must be restricted.

Refer to installation instruction

IMPORTANT: when installing the appliance above a cupboard, a dividing shelf, as shown above, must be installed.

If installed above an under-bench oven, this is not required.

Installation of an oven without cooking fan underneath the hob is forbidden.

Page 6

Image 6

Smeg PGF75BE3, PGF75-3 manual Instructions for the installer, Refer to installation instruction

Contents

Summary 3 ADJUSTMENT TO DIFFERENT TYPES OF GAS 4 FINAL OPERATIONS5 USING THE HOB 6 CLEANING AND MAINTENANCE 1 INSTRUCTIONS FOR SAFE AND PROPER USE 2 POSITIONING OF THE HOBNEVER UNPLUG THE APPLIANCE BY PULLING THE POWER SUPPLY CABLE Introduction1 INSTRUCTIONS FOR SAFE AND PROPER USE THE MANUFACTURER DECLINES ALL LIABILITY FOR IMPROPER USEIntroduction THE DATA PLATE ON THE PROTECTIVE COVER MUST NEVER BE REMOVEDInstructions for the installer 2 POSITIONING OF THE HOB2.1 Attachment to support structure, traditional built-in model 2.2 Attachment to support structure, flush-mounting model Instructions for the installerApply a layer of “waterproof primer” to the milled surface Instructions for the installer Refer to installation instruction2.3 Electrical connection Instructions for the installer2.4 Ventilation requirements 2.5 Discharge of combustion productsInstructions for the installer Connection with rigid copper pipe 2.6 Gas connection2.7 Connection to LPG Connection with flexible steel pipe3 ADJUSTMENT TO DIFFERENT TYPES OF GAS 3.1 Replacement of nozzles on the hobInstructions for the installer BURNERS 3.2 Burner and nozzle characteristics table3.3 Arrangement of burners on cooking hob Instructions for the installer4.2 Regulation of minimum for LPG 4 FINAL OPERATIONS4.1 Regulation of minimum for town gas and natural gas 4.3 Lubrication of gas taps5 USING THE HOB Instructions for the user5.1 Ignition of the burners Ø min. and max 5.2 Practical advice for using the burners5.3 Diameter of receptacles Ø min. and max. cm6.2 Cleaning of cooking hob components 6 CLEANING AND MAINTENANCE6.1 Cleaning the stainless steel 6.1.1 Routine daily cleaningInstructions for the user