GB
A | Open door button | Press the button to open the door. Chapter 5 – Washing |
|
| instructions – explains how the door works and how to use it. |
|
|
|
BON-OFF and washing programme selection knob
This knob lets you:
•switch the machine on and off by moving it in either direction from the OFF position (knob indicator vertical)
•select washing temperatures within the various fabric sectors by turning it in both directions
The knob does not move while the programme is running. The programme is electronically controlled by the machine.
CProgramme phase LED'S
Start
Wash
End
D“Start/Pause” button
The programme phase LED's indicate which phase of the programme the washing machine is in. The operating phases, shown to the side of the LED's, are the following:
START
This LED indicates that the machine is on but the selected washing programme has not started yet. This is the phase in which the programme select knob has been turned but the “Start/Pause” button has not been pressed yet.
WASH
The “Start/Pause” button has been pressed and the washing programme is running. The LED remains on throughout the washing programme.
END
The LED lights up when the washing programme has finished. It switches off when the machine is switched off (programme select knob to OFF) or when the “Start/Pause” button is pressed again.
Press this button to start the selected washing programme. During washing, press the “Start/Pause” button for about 3 seconds to pause the washing cycle. During the pause, the “Wash” programme phase LED flashes.
To resume the washing cycle from where it left off, simply press the “Start/Pause” button again.
10
