Manuals / Smeg / Kitchen Appliance / Dishwasher

Smeg ST144 Width, Depth measured flush with the outer edge of, the control panel, Height

Models: ST144

1 27

Page 25

User instructions

TECHNICAL DATA

Width		597 ⎟ 599 mm

Depth measured flush with the outer edge of		Free standing: 600 mm
the control panel		Fully integrated: 570 mm

Height		Free standing from 850 mm to 870 mm
		Fully integrated from 820 mm to 870 mm

Capacity		14 Standard place settings

Water supply pressure		min. 50 – max. 900 KPa (min. 0.5 – max. 9 bar)

Electrical characteristics		See rating plate

Page 25

Image 25

Smeg ST144 Width, Depth measured flush with the outer edge of, the control panel, Height, Capacity, Water supply pressure

Contents

DISHWASHER 1. Safety and operating instructions 2. Installation and hook-up Contents5. Cleaning and maintenance 6. Troubleshooting1. Safety and operating instructions Safety instructionsNEVER UNPLUG THE APPLIANCE BY PULLING THE POWER CORD DESCRIBED ABOVEAQUASTOP MODELS Safety instructionsDO NOT ATTEMPT TO REPAIR THE APPLIANCE 2. Installation and hook-up Installation instructionsCONNECTING TO THE WATER SUPPLY 2.1 Water supply connectionDRAIN CONNECTION 2.2 Electrical connectionInstallation instructions 3. Description of the controls User instructions3.1 Upper panel 3.2 Information displayDELAYING THE PROGRAM SWITCHING OFFANNULLING THE PROGRAM IN PROGRESS MODIFYING THE PROGRAMTABLE OF PROGRAMS and maintenance of the dishwasher, read the enclosed manual carefullyIf the dishwasher door is left open or is not properly closed, the For any other information about useBefore starting a washing program make sure that 3.3 Washing programsThe correct amount of detergent has been added to the dispenser HALF-LOAD FUNCTIONREMOVING THE DISHES TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENTSLIDING FACING PANEL for fully integrated models only User instructionsWARNINGS MOVING THE FACING PANELUser instructions ADJUSTING THE WATER SOFTENING SYSTEM 4.1 Using the water softening system4. Operating instructions User instructionsSETTING ELECTRONIC SETTINGSWITCH SETTING WATER HARDNESSADJUSTING THE RINSE AID DISPENSER SETTING 4.2 Using the rinse aid and detergent dispensersWATER HARDNESS TABLE ADDING THE RINSE AIDUser instructions ADDING THE DETERGENTDuring the washing cycle, the dispenser will be opened automatically Correct loading of the dishes helps ensure optimal washing results 4.3 General warnings and recommendationsMAKE SURE that the items being washed are dishwasher-safe Items which are not dishwasher-safeLOWER BASKET 4.4 Using the basketsLOADING THE LOWER BASKET Loading examplesUPPER BASKET CUTLERY BASKETUser instructions LOADING THE UPPER BASKET Loading examples ADJUSTING THE UPPER BASKETPull-out version Push-button versionCLEANING THE WATER INTAKE FILTER 5. Cleaning and maintenanceCLEANING THE SPRAY ARMS CLEANING THE ORBITAL VERSION SPRAY ARMGENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE CLEANING THE FILTER UNITPROLONGED DISUSE Fill the rinse aid dispenser Shut off the water supply tapIf the dishes are not being cleaned properly, check that TROUBLESHOOTING MINOR PROBLEMSIf the program fails to start, check that If water remains inside the dishwasher, check thatTABLE OF FAULTS DETECTED BY THE SELF-DIAGNOSTICS SYSTEM 6. TroubleshootingFAULT The temperature monitoring system has failedWidth Electrical characteristicsDepth measured flush with the outer edge of the control panel820 3x16816-870 1/2”SUPERFICIE INTERNA

TECHNICAL DATA

Width

Depth measured flush with the outer edge of

the control panel

Height

Capacity

Water supply pressure

Electrical characteristics