Instructions for the Installer
10. ADAPTING TO DIFFERENT TYPES OF GAS
Before carrying out the operations described below, disconnect the appliance from the electricity supply.
The appliance is tested with G20 (2H) natural gas at the pressure of 20 mbar. If it is to be used with other types of gas, the burner nozzles have to be changed and the gas taps adjusted to set the minimum flame. To replace the nozzles, proceed as described below.
10.1 Changing the hob nozzles
1Remove the pan stands, all the burner caps and the flame diffuser rings
2Use a 7 mm socket wrench to unscrew the burner nozzles;
3Replace the burner nozzles depending on the type of gas to be used (see point "10.2 Burner and Nozzle Data Tables").
4Put the burners back into place correctly.
47