GB
9
3.7 FITT ING T H E FUR NIT URE DOO RS
Once the washer dryer has been c orrectly installed and commissioned, the furniture door can be f itted following
the dimensions on the template and the instruction enclosed in the washer dryer packaging.
Please note that only furniture doors of a thickness between 16mm and 21m m are compatible with this washer
dryer.
Important – The machine complies with the current safety provisions governing electrical equipment. It
must be installed by a specialised technician in compliance with the current standards in order to prevent
it from becoming a potential danger for the user.
3.7.1 Ho w to fit the furniture door
The furniture door that covers the front can be hinged on either the left side or right side.
For pratical reasons, it is advisable to maintain the same opening direction as the glass door (with hinges applied
to the left-hand side).
The appliance has hinge supports on t he left-hand side, whilst the push-push closing system is mounted on the
upper right-hand part.
If the magnetic closing mechanism is required, remove the existing component (B) and install the component (D)
as illustrated below.
Important! Ensure that the appliance is disconnected from electricity supply before installing the furniture
door (during which all hinging and closing mechanisms must be removed from the front) on to the washer
dryer).
Warning – To hinge the panel on the right-hand side (opening direct ion opposite to that of the glass door),
completely remove the hinge supports (A), the closing hook (B), the lower bearing plug of the rubber plug (C) from
the front part of the machine and f it them to the opposite side.
All parts fitted to the front of the washing dryer must be correctly remounted (no hole must be left open). This will
prevent users from touching live parts of the appliance.
Our company declines all responsibility for damage caused by failure or negligence in complying with
these safety provisions.