Start the operation
Interruptions
187352
•Push the START/PAUSE button (C). The ON/OFF LED stops flashing, the machine starts operating after a few seconds. If the door is not properly closed after starting the operation, the ON/OFF LED starts flashing again after a few seconds. When you close the door, the machine initiates the selected program.
•In case you would like to alter the washing program after the initiated washing operation, turn the program selector for one second to the position “0”, followed by the selection of a new program. Switching the machine off deletes any previously selected additional functions - Rinse hold, so they have to be reactivated.
-End of operation
Flashing ON/OFF LED indicates that the program was completed.
•Extract the laundry from the drum and remove any alien objects from the door gasket.
•Leave the door ajar to allow the interior to dry.
•Close the water inlet faucet.
•Switch the machine off by turning the program selector to position “0”.
•By the user
Selecting Rinse hold function
Program is stopped when it comes to the Rinse hold stage (if this function had been previously selected). Drum door remains closed all the time. Indicator LED above the rinse hold function starts flashing. Washing procedure is continued by pressing the START/PAUSE button (C).
Own interruption
You may also stop the program by turning the program selector to the position “0”. If there is water in the drum select one of additional programs (drain,
14
