Cautions
•Be sure to remove transport brackets prior first use of the appliance. Attempted operation of the blocked machine may result in irreparable damage which is not covered by the manufacturer’s warranty!
•When connecting your washing machine to water supply, be sure to use brand new water inlet hose and appropriate sealing gaskets (attached).
•Do not locate the machine in a room with temperature below 0°C. Parts of the machine may be damaged if frozen.
•Install the washing machine in a perfectly horizontal position, on solid flat concrete floor.
•Follow the instructions for correct installation and water and mains connections.
•Never immerse the end of the drain hose into the draining water.
•Prior starting the washing cycle lock the door by pressing them at the designed spot.
•Door may not be open during the washing cycle.
•Use only detergents and softeners for machine wash. Manufacturer may not assume responsibility for any damage and eventual discoloring of gaskets and plastic components as a consequence of incorrect use of bleach and/or coloring agents.
•For removal of lime residues use such agents with added
•Never use detergents containing solvents, since there is a danger of creating toxic gasses which may damage the machine and result in ignition or explosion.
•Upon completion of washing operation close the water faucet.
•Before any transport block the machine by inserting at least one transport blocking rod. Prior this operation disconnect the appliance from the mains power!
•Rating plate with basic information is located above the opening of the machine.
•The warranty shall not apply to consumables (bulbs), minor discoloration or deviations of color, increased noise level as a consequence of appliance age, which does not affect appliance functionality, and aesthetical deficiencies which do not affect appliance functionality or safety.
